Counterflow Cooler

The Crocus Counterflow Cooler is designed to cool and dry extruded and heat-treated feed and pellets.
The Cooler is available in two designs for flexibility of installation. The square cooler can be supplied with an inlet capacity of up to 60 tons/hour and the round cooler up to 40 tons/ hour. A relatively low aerodynamic resistance

(due to the design of the discharge section) ensures a relatively low energy consumption. The cooler can be equipped with a discharge hopper for fast change over. The system is both economic and effective compared with other systems.
See “Technical data” for details.

Technical data

PDF brochure

CCS
Type 100 101 150 151 200 201 250 251 300 301 350 351
Capacity (t/h):
Pillet size:
4 mm, 650 kg/m3
Water content:
15 - 16%
Fat content: 4 - 6%
Air volume:
900 - 1200 m3/t/h
Resistance:
1000 - 1500 Pascal
10 15 15 20 25 30 35 40 45 50 55 60
Area (m2) 3,6 4,4 5,2 6,1 7,1 8,1 9,3 10,4 11,7 13,0 14,5 15,9
CCR
Type 100 150 200 250 300 350
Capacity (t/h):
Pillet size:
4 mm, 650 kg/m3
Water content:
15 - 16%
Fat content: 4 - 6%
Air volume:
900 - 1200 m3/t/h
Resistance:
1000 - 1500 Pascal
10 15 20 25 30 35
Area (m2) 2,9 4,1 5,6 7,3 9,1 11,3

Crocus    Virkevangen 25    Assentoft    8960 Randers SØ    Tlf.: +45 87 95 93 00    Fax: +45 87 95 93 09    crocus@crocus.dk